我們業內人員都知道鋼筋彎曲試驗機有很多特點，使用廣泛，是檢驗螺紋鋼筋冷彎性能和反彎性能不可缺少的理想試驗儀器。那么，鋼筋彎曲試驗機到底有什么作用呢?濟南恒思盛大為大家總結了以下五條：

Our industry personnel are aware of reinforced bar bending machine has many characteristics, widely used, is the ideal test instrument indispensable test bar bending property and anti bending performance. Then, bending testing machine what role? Jinan Heng think big as we summed up the following five:

、按加工鋼筋的直徑和彎曲機的要求裝好芯軸，成型軸，擋鐵軸或可變擋架，芯軸直徑應為鋼筋直徑的2.5倍。
First, according to the diameter and bending machine processing steel requirements with mandrel, forming shaft, gear axle or variable block frame, axle diameter should be 2.5 times the bar diameter.

第二、檢查彎曲試驗機的機械性能是否良好、工作臺和彎曲機臺面保持水平;并準備好各種芯軸工具擋。
Mechanical properties of second, check the bending test machine is good, work table and bending machine table level; and prepare various core axis tool block.

第三、彎曲高硬度或低合金鋼筋時，應按機械銘牌規定換標限制直徑，并調換相應的芯軸。
Third high hardness, bending or low alloy steel, should press machinery nameplate specified in standard maximum diameter, the core shaft and replace the corresponding.

第四、鋼筋彎曲試驗機轉盤換向時，必須在停穩后進行。　
Fourth, steel bending test machine rotary reversing, must be carried out at the stop.

第五、作業中嚴禁更換芯軸和變換角度以及調速等作業，亦不得加油或清除。
Fifth, work no replacement of core shaft and transform the angle and speed regulating operation, no gas or clear.